CMP241220000 MultiPlus C 24/1200/25-16 Victron Energy
-
- Brand: Victron Energy
- Availability: In Stock
- Product Code: CMP241220000
- Bluetooth
- DC Input/Output , V 24
- Input voltage, AC (DC) 230V Sinewave
- Output current, А
- Output power, W 1200
Uninterrupted AC power (UPS function)
In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.>
Two AC Outputs
The MultiPlus can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The MultiPlus will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the MultiPlus takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the MultiPlus. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Virtually unlimited power thanks to parallel operation
Up to 6 MultiPlus can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.
Remote Monitoring and Control
Monitor and control your MultiPlus and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more...
Two AC Outputs
The main
output has no break functionality. The MultiPlus takes over the supply to the
connected loads in the event of a grid failure or when shore/generator power is
disconnected. This happens so fast (less than 20 milliseconds) that computers
and other electronic equipment will continue to operate without disruption.The
second output is live only when AC is available on the input of the MultiPlus.
Loads that should not discharge the battery, like a water heater for example
can be connected to this output (second output available on models rated at 3
kVA and more).
Virtually unlimited power thanks to parallel
operation
Up to 6
Multis can operate in parallel to achieve higher power output. Six 24/5000/120
units, for example, will provide 25 kW / 30 kVA output power with 720 Amps
charging capacity.
Three phase capability
In addition
to parallel connection, three units of the same model can be configured for
three phase output. But that’s not all: up to 6 sets of three units can be
parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps
charging capacity.
PowerControl - Dealing with limited generator,
shore side or grid power
The
MultiPlus is a very powerful battery charger. It will therefore draw a lot of
current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at
230 VAC). With the Multi Control Panel a maximum generator or shore current can
be set. The MultiPlus will then take account of other AC loads and use whatever
is extra for charging, thus preventing the generator or shore supply from being
overloaded.
PowerAssist - Boosting the capacity of shore or
generator power
This
feature takes the principle of PowerControl to a further dimension. It allows
the MultiPlus to supplement the capacity of the alternative source. Where peak
power is so often required only for a limited period, the MultiPlus will make
sure that insufficient shore or generator power is immediately compensated for
by power from the battery. When the load reduces, the spare power is used to
recharge the battery.
Solar energy: AC power available even during a
grid failure
The
MultiPlus can be used in off grid as well as grid connected PV and other
alternative energy systems. Loss of mains detection software is available.
System configuring
- In case
of a stand-alone application, if settings have to be changed, this can be done
in a matter of minutes with a DIP switch setting procedure.
- Parallel
and three phase applications can be configured with VE.Bus Quick Configure and
VE.Bus System Configurator software.
- Off grid,
grid interactive and self-consumption applications, involving grid-tie
inverters and/or MPPT Solar Chargers can be configured with Assistants
(dedicated software for specific applications).
On-site Monitoring and control
Several
options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power
Panel, Color Control Panel, smartphone or tablet (Bluetooth Smart), laptop or
computer (USB or RS232).
Remote Monitoring and control
Victron
Ethernet Remote, Venus GX and the Color Control Panel. Data can be stored and
displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Color Control panel can be accessed remotely and settings can be changed.
| Technical information | |
| Bluetooth | |
| DC Input/Output , V | 24 |
| Input voltage, AC (DC) | 230V Sinewave |
| Output current, А | |
| Output power, W | 1200 |
| Outputs | |
| Size | 375 x 214 x 110 |
| VE.Bus | |
