BPC241642002 Blue Smart IP22 Charger 24/16 (1) Victron Energy
- Brand: Victron Energy
- Availability: In Stock
- Product Code: BPC241642002
- Bluetooth bluetooth
- DC Input/Output , V 24
- Input voltage, AC (DC) 180-265VAC/45-65Hz
- Output current, А 16
- Output power, W 384
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. Blue Smart IP22 Battery Charger: The highest efficiency ever! With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Bluetooth Smart enabled
The Blue
Smart IP22 Charger is the wireless solution to monitor voltage and current, to
change settings and to update the charger when new features become
available.
High efficiency
With up to
94% efficiency, these chargers generate up to four times less heat when
compared to the industry standard. And once the battery is fully charged, power
consumption reduces to 0,5 Watt, some five to ten times better than the industry
standard.
Adaptive 6-stage charge algorithm: test - bulk
– absorption - recondition – float – storage
The Blue
Smart Charger features a microprocessor controlled ‘adaptive’ battery
management. The adaptive feature will automatically optimize the charging
process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when
the battery is not in use
The storage
mode kicks in whenever the battery has not been subjected to discharge during
24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for
a 12V battery) to minimize gassing and corrosion of the positive plates. Once a
week the voltage is raised back to the absorption level to ‘equalize’ the
battery. This feature prevents stratification of the electrolyte and sulfation,
a major cause of early battery failure.
Also charges Li-ion (LiFePO₄) batteries
LiFePO₄
batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in
NIGHT or LOW mode, the output current is reduced to max. 25% of the nominal
output and the charger will be totally noiseless. The NIGHT mode automatically
ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output
current will reduce as temperature increases up to 50°C, but the Blue Smart
Charger will not fail.
Eleven LEDs for status indication
Charge
algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY.
MODE button
to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
Technical information | |
Bluetooth | bluetooth |
DC Input/Output , V | 24 |
Input voltage, AC (DC) | 180-265VAC/45-65Hz |
Output current, А | 16 |
Output power, W | 384 |
Outputs | 1 |
Size | 235 x 108 x 65 |
VE.Bus |